+
  • 钢衬碳化硅(SiC)容器.jpg

Steel-lined silicon carbide (SiC) vessel

Silicon carbide (SiC) lined steel vessel is an ideal product for conveying high-speed silicon powder, cement dust, fly ash and other media made by casting silicon carbide lining layer on the inner wall of steel parts with imported silicon carbide raw materials supplied by Norway's Elkem group, which has excellent wear resistance, pressure resistance, high temperature resistance, heat resistance, etc.

Keywords:

Valve pipeline

Product details

Silicon carbide (SiC) lined steel vessel is an ideal product for conveying high-speed silicon powder, cement dust, fly ash and other media made by casting silicon carbide lining layer on the inner wall of steel parts with imported silicon carbide raw materials supplied by Norway's Elkem group, which has excellent wear resistance, pressure resistance, high temperature resistance, heat resistance, etc.

Product Features

1. It has excellent corrosion resistance, with the temperature range of -60℃~1000℃;

2. It has excellent wear resistance with hardness between corundum and diamond and mechanical strength higher than corundum;

3. With small thermal expansion coefficient, it has good thermal conductivity, and anti-oxidation during high temperature.

Steel-lined Silicon Carbide (SiC) Vessel Branch Pipe Lining Thickness and Bore Diameter Dimension Data (Unit: mm)

Nominal diameter DN25 DN32 DN40 DN50 DN65 DN80 DN100 DN125 DN150
Steel Pipe Selection Ø42×3 Ø45×3 Ø57×3 Ø76×4 Ø89×4 Ø108×4 Ø133×4 Ø159×4.5 Ø168×5
Liner thickness 8 9.5 10.5 9 8 10 14.5 14.5 12.5
Liner diameter 20 20 30 50 65 80 96 121 133
Seal face thickness 0 0 0 0 0 0 0 0 0

 

Nominal diameter DN200 DN250 DN300 DN350 DN400 DN450 DN500 DN600 Subject
Steel Pipe Selection Ø219x6 Ø273x7 Ø325x8 Ø377x9 Ø426x9 Ø480x10 Ø530x10 Ø630x10 —
Liner thickness 13.5 15 15 17 18 17 20 20 ≥20
Liner diameter 180 229 279 325 372 426 470 570 —
Seal face thickness 0 0 0 0 0 0 0 — 0

Standard for the selection of steel pipes for pressure vessels: GB/T 9948

Note:

1. Branch pipes shall be kept as short as possible in accordance with lining process requirements,

Recommended protruding height: 100~120mm for branch pipes and 200mm for manholes, excluding special conditions.

(Steel pipes for atmospheric pressure vessels adopt standard GB/T 8163)

ONLINE MESSAGE

*Note: Please make sure to fill in the information accurately and maintain smooth communication. We will contact you as soon as possible