+
  • 钢衬聚乙烯(P-PO)容器.jpg

Steel-Lined Polyethylene (PE/PO) Vessel

Steel-lined polyethylene(PE/PO) vessel is a product formed by hot rotational lining processing technology, which is rotational anti-corrosion PE powder or anti-corrosion modified PO powder with good fluidity and high adhesion together with the heated steel body (steel mesh welded on inner wall) and melt evenly on the inner wall of the steel body.

Keywords:

Valve pipeline

Product details

Steel-lined polyethylene(PE/PO) vessel is a product formed by hot rotational lining processing technology, which is rotational anti-corrosion PE powder or anti-corrosion modified PO powder with good fluidity and high adhesion together with the heated steel body (steel mesh welded on inner wall) and melt evenly on the inner wall of the steel body.

Product Features

1.  It has good corrosion resistance, with the temperature range of -25°C ~ 80°C;

2. With high adhesion, it can be used under certain negative pressure conditions;

3. With good fluidity, it can be used to process steel parts that are complex in shape.

Steel-lined Polyethylene (PE/PO) Vessel Branch Pipe Lining Thickness and Bore Diameter Data (Unit: mm)

Nominal diameter DN25 DN32 DN40 DN50 DN65 DN80 DN100 DN125 DN150
Steel Pipe Selection Standards / / / Ø76×4 Ø76×4 Ø89×4 Ø108×4 Ø133×4 Ø159×4.5
Liner thickness / / / 8 8 10 10 10 10
Liner diameter / / / 52 52 61 80 105 130
Seal face thickness / / / 10 10 10 10 10 0

 

Nominal diameter DN200 DN250 DN300 DN350 DN400 DN450 DN500 DN600 Subject
Steel Pipe Selection Standards Ø219×6 Ø273×7 Ø325×8 Ø377×9 Ø426×9 Ø480×10 Ø530×10 Ø630×10 —
Liner thickness ≥10 ≥10 ≥10 ≥10 ≥10 ≥10 ≥10 ≥10 ≥10
Liner diameter 187 239 289 339 388 440 490 590 —
Seal face thickness 12 12 12 12 15 15 15 15 20

Standard for the selection of steel pipes for pressure vessels: GB/T 9948

Note:

1. Branch pipes shall be as short as possible in accordance with lining process requirements. Recommended protruding height: 100~120mm for pipe nozzles and 200mm for manholes, excluding special conditions; (Steel pipes for atmospheric pressure vessels comply with GB/T 8163)

2. Due to rotational PE/PO lining process requirements, the minimum branch pipe diameter is DN50 to ensure internal passage diameter.
Reducers can be matched upon customer request to meet application requirements;

3. For equipment with DN200 and above, lining thickness of branch pipes shall be adjusted synchronously according to the main vessel lining thickness specifications.

ONLINE MESSAGE

*Note: Please make sure to fill in the information accurately and maintain smooth communication. We will contact you as soon as possible