PRODUCTS
Fax: 0575-87215311
Web: www.cntongqiu.cn
Tel: 0575-87381708
0575-87386708
Technical R&D Department Tel: 0575-80706629
Email: cntongqiu@cntongqiu.com
Address: No. 2 Hongyan Road, Feida Industrial Park, Paitou Town, Zhuji City, Zhejiang Province
Steel-Lined F40 Vessel
Classification:
Keywords:
Valve pipeline
Product details
There are two processes for rotational molding and spraying coating for Steel-lined F40 Vessel;
The rotational molding is a kind of product made by adding F40 powder into the inner wall of steel parts and then carrying out rotary heating; The product is manufactured by spraying F40 powder onto the inner wall of steel parts with a spray gun at high temperature, followed by heating and fusion bonding.
Product Features
1. The temperature range for use is -60 °C ~ 120 °C under the working condition of strong corrosive medium;
2. It has high tensile strength, long expansion life and good tensile strength;
3. With strong adhesion, the temperature range of -60°C ~ 100°C, it can be used under negative pressure conditions;
4. The electrostatic spraying processing process can be used to process the complicated steel parts in shape, F40 spraying coating thickness shall be 0.6~0.8 mm.
Steel-lined F40 Vessel Branch Pipe Lining Thickness and Bore Diameter Data (Unit: mm)
| Nominal diameter | DN25 | DN32 | DN40 | DN50 | DN65 | DN80 | DN100 | DN125 | DN150 |
| Steel Pipe Selection Standards | Ø38x3 | Ø42x3 | Ø48x3 | Ø60x4 | Ø76x4 | Ø89x4 | Ø108x4 | Ø133x4 | Ø159x4.5 |
| Liner thickness (sprayed) | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 |
| Liner Bore (Sprayed) | 30.4 | 34.4 | 40.4 | 50.4 | 66.4 | 79.4 | 98.4 | 123.4 | 148.4 |
| Seal face thickness (sprayed) | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 |
| Liner thickness (roller application) | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Liner diameter (roller coating) | 28 | 32 | 38 | 48 | 64 | 77 | 96 | 121 | 146 |
| Sealant surface thickness (roller coating) | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Nominal diameter | DN200 | DN250 | DN300 | DN350 | DN400 | DN450 | DN500 | DN600 | Subject |
| Steel Pipe Selection Standards | Ø219x6 | Ø273x7 | Ø325x8 | Ø377x9 | Ø426x9 | Ø480x10 | Ø530x10 | Ø630x10 | - |
| Liner thickness (sprayed) | 0.8 | 0.8 | 0.8 | 0.8 | 0.9 | 0.8 | 0.8 | 0.8 | 0.8~1 |
| Liner Bore (Sprayed) | 205.4 | 257.4 | 307.4 | 357.4 | 406.4 | 458.4 | 508.4 | 608.4 | - |
| Seal face thickness (sprayed) | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8~1 |
| Liner thickness (roller application) | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 |
| Liner diameter (roller coating) | 203 | 255 | 305 | 355 | 404 | 456 | 506 | 606 | - |
| Sealant surface thickness (roller coating) | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 |
Standard for the selection of steel pipes for pressure vessels: GB/T 9948
Note:
1. Branch pipes shall be as short as possible in compliance with lining process requirements,
The recommended protruding height is 100~120mm for branch pipes and 200mm for manholes, except for special cases.
(Steel pipes for atmospheric vessels conform to GB/T 8163, DN50-Ø60×3)
Related products
ONLINE MESSAGE
*Note: Please make sure to fill in the information accurately and maintain smooth communication. We will contact you as soon as possible