+
  • 钢衬四氟-(PTFE)等静压容器.jpg

Steel-Lined PTFE Isostatic Pressing Vessel

Isostatic PTFE-lined Steel Vessel is to fill PTFE powder in the inner wall of the steel body, put it in the isostatic pressure kettle, set it by high water pressure, press the filler with hydraulic press, and then sinter it to the composite pipe.

Keywords:

Valve pipeline

Product details

Isostatic PTFE-lined Steel Vessel is to fill PTFE powder in the inner wall of the steel body, put it in the isostatic pressure kettle, set it by high water pressure, press the filler with hydraulic press, and then sinter it to the composite pipe.

Product Features

① The temperature range for use is -60°C ~ 180°C under the working condition of strong corrosive medium and positive pressure. The temperature range for use is -60°C ~ 120°C under the working condition of strong corrosive medium slight negative pressure. The thickness and length of the lining layer shall be adjusted accordingly based on different temperatures and negative pressures;

② Pressurized in an isostatic press, resulting in high product density and excellent impermeability;

③ The high water pressure of steel parts and PTFE powder in the isostatic pressure kettle is uniform inside and outside, which will not cause deformation of steel parts.

Steel-lined PTFE Isostatic Vessel Branch Pipe LiningThickness and Bore Diameter Data (Unit: mm)

Nominal diameter DN25 DN32 DN40 DN50 DN65 DN80 DN100 DN125 DN150
Steel Pipe Selection Standards Ø38×3 Ø42×3 Ø48×3 Ø60×4 Ø76×4 Ø89×4 Ø108×4 Ø133×4 Ø159×4.5
Liner thickness 4.5 4.5 4.5 5 5 5.5 6 6 7
Liner diameter 23 27 33 42 58 70 88 113 136
Seal Face Thickness I 6 6 7 8 8 8 10 10 12
Seal Face Thickness II 2.8 2.8 3.1 3.1 3.4 3.4 3.4 4.2 4.6

 

Nominal diameter DN200 DN250 DN300 DN350 DN400 DN450 DN500 DN600 Subject
Steel Pipe Selection Standards Ø219×6 Ø273×7 Ø325×8 Ø377×9 Ø426×9 Ø480×10 Ø530×10 Ø630×10 -
Liner thickness 8 9 9 9 9 9 9 10 ≥10
Liner diameter 191 241 291 341 390 442 492 590 -
Seal Face Thickness I 6.5 7.2 7.2 7.2 7.2 7.2 7.2 7.2 ≥10
Seal Face Thickness II 5.1 5.8 6.8 6.8 7.3 7.6 7.8 7.8 ≥8

Standard for the selection of steel pipes for pressure vessels: GB/T 9948

Note:

1. Branch pipes shall be kept as short as possible to meet lining process requirements,

Recommended protruding height: 100~120mm for branch pipes and 200mm for manholes, special circumstances excluded;

(Steel pipes for atmospheric pressure vessels comply with GB/T 8163, DN50-Ø60×3)

2. In the table, Type I refers to isostatic pressing process, Type II refers to secondary isostatic pressing forming process,

Process schemes shall be formulated according to equipment structure;

3. Main body lining thickness can be customized according to working conditions and customer requirements.

ONLINE MESSAGE

*Note: Please make sure to fill in the information accurately and maintain smooth communication. We will contact you as soon as possible