+
  • 钢衬四氟-(PTFE)-缠绕容器.jpg

Steel-Lined PTFE Wound Lining Vessel

Steel-lined PTFE wound lining vessels adopt PTFE films or strips, which are spirally wound onto the inner wall of steel components by special winding machines. After hot pressing and shaping, a seamless anti-corrosion lining layer is formed. Metal mesh is often embedded to enhance structural strength, pressure resistance and vibration resistance.

Keywords:

Valve pipeline

Product details

Steel-lined PTFE wound lining vessels adopt PTFE films or strips, which are spirally wound onto the inner wall of steel components by special winding machines. After hot pressing and shaping, a seamless anti-corrosion lining layer is formed. Metal mesh is often embedded to enhance structural strength, pressure resistance and vibration resistance.

Product Features

① Suitable for high-pressure and highly corrosive media, with an operating temperature range of -60°C ~ 180°C, and instantaneous local temperature resistance up to 250°C;

② Resists negative pressure above -0.04 MPa; vacuum-resistant rings are required for pressure beyond this value;

③ Applicable to regular-shaped equipment with diameter Ø200~Ø2000.

Lining Thickness and Nominal Diameter Data for Nozzles of Steel Wound PTFE-lined Vessels (Unit: mm)

Nominal diameter DN25 DN32 DN40 DN50 DN65 DN80 DN100 DN125 DN150
Steel Pipe Selection Standards Ø38×3 Ø42×3 Ø48×3 Ø60×4 Ø76×4 Ø89×4 Ø108×4 Ø133×4 Ø159×4.5
Liner thickness 4.5 4.5 4.5 5 5 5.5 6 6 7
Liner diameter 23 27 33 42 58 70 88 113 136
Seal Face Thickness II 2.8 2.8 3.1 3.1 3.4 3.4 3.4 4.2 4.6

 

Nominal diameter DN200 DN250 DN300 DN350 DN400 DN450 DN500 DN600 Subject
Steel Pipe Selection Standards Ø219x6 Ø273x7 Ø325x8 Ø377x9 Ø426x9 Ø480x10 Ø530x10 Ø630x10 -
Liner thickness 8 9 9 9 9 9 9 10 3~6
Liner diameter 191 241 291 341 390 442 492 590 -
Seal Face Thickness II 5.1 5.8 6.8 6.8 7.3 7.6 7.8 7.8 2~5

Standard for the selection of steel pipes for pressure vessels: GB/T 9948

Note:

1. Branch pipes shall be as short as possible in accordance with lining process requirements,
Recommended height above surface: 100~120mm for branch pipes and 200mm for manholes, excluding special conditions;
(Steel pipes for atmospheric pressure vessels comply with GB/T 8163, DN50~060x3)

2. The maximum nominal diameter of the main body is DN2000, and the lining thickness can be customized according to customer requirements.

ONLINE MESSAGE

*Note: Please make sure to fill in the information accurately and maintain smooth communication. We will contact you as soon as possible