+
  • 钢衬四氟 (PTFE) 板衬容器.jpg

Steel-Lined PTFE Sheet Lined Vessel

Steel-lined PTFE plate-lined vessels are manufactured by bonding PTFE turned plates to the inner wall of the steel structure with high-temperature resistant adhesive. The plates are then integrally welded using PFA welding rods. (Suitable for special-shaped structures or partial external lining applications.)

Keywords:

Valve pipeline

Product details

Steel-lined PTFE plate-lined vessels are manufactured by bonding PTFE turned plates to the inner wall of the steel structure with high-temperature resistant adhesive. The plates are then integrally welded using PFA welding rods. (Suitable for special-shaped structures or partial external lining applications.)

Product Features

1. The temperature range for use is -60°C ~ 110°C under the working condition of strong corrosive medium and positive pressure;

2. If there is negative pressure, rivet, negative pressure ring or negative pressure pump is required depending on the negative pressure;

3. It is suitable for equipment container lining with the diameter of more than Ø600. If the diameter of the steel parts is more than 5 meters, the construction on the site is required.

Steel-lined (PTFE) Sheet Lined Vessel Branch Pipe Lining Thickness and Bore Diameter Data (Unit: mm)

Nominal diameter DN25 DN32 DN40 DN50 DN65 DN80 DN100 DN125 DN150
Steel Pipe Selection Standards Ø38×3 Ø42×3 Ø48×3 Ø60×4 Ø76×4 Ø89×4 Ø108×4 Ø133×4 Ø159×4
Liner thickness 3.5 3.5 4 4 4 4.5 4.5 5 6
Liner diameter 25 29 34 44 60 72 91 115 138
Seal face thickness 3 3 3 3.5 3.5 4 4 4.5 5

 

Nominal diameter DN200 DN250 DN300 DN350 DN400 DN450 DN500 DN600 Subject
Steel Pipe Selection Standards Ø219×6 Ø273×7 Ø325×8 Ø377×9 Ø426×9 Ø480×10 Ø530×10 Ø630×10 -
Liner thickness 3 3 3 3 3 3 3 3 3
Liner diameter 201 253 303 353 402 454 504 604 -
Seal face thickness 3 3 3 3 3 3 3 3 3

Standard for the selection of steel pipes for pressure vessels: GB/T 9948

Note:

1. Branch pipes shall be kept as short as possible in compliance with lining process requirements.

Recommended protruding height: 100~120mm for nozzles and 200mm for manholes, special cases excluded.

(Steel pipes for atmospheric pressure vessels comply with GB/T 8163, DN50-Ø60×3)

ONLINE MESSAGE

*Note: Please make sure to fill in the information accurately and maintain smooth communication. We will contact you as soon as possible