+
  • 钢衬四氟(PTFE)推拉复合管.jpg

Steel-Lined PTFE Push-Pull Composite Pipe

Steel-lined PTFE push-pull composite pipe is made by pulling the finished PTFE pipe into the inner wall of the steel part, and then flanging after the stress is released. This process is only suitable for the production of straight pipes, and the fittings are made in accordance with the molding process.

Keywords:

Valve pipeline

Product details

Steel-lined PTFE push-pull composite pipe is made by pulling the finished PTFE pipe into the inner wall of the steel part, and then flanging after the stress is released.
This process is only suitable for the production of straight pipes, and the fittings are made in accordance with the molding process.

Product Features

1. The temperature range for use is -60°C ~ 100°C under the working condition of strong corrosive medium and positive pressure;

2. Under working conditions with strong corrosive media, the thickness and length of the lining layer shall be adjusted accordingly based on different temperatures and media.

PTFE-lined steel sliding process dimensional data (unit: mm)

Nominal diameter DN25 DN32 DN40 DN50 DN65 DN80 DN100 DN125 DN150 DN200 DN250 DN300 DN350 DN400 DN450 DN500 DN600
Straight pipe dimensions ≤ 2000 ≤ 4000 ≤3000
Liner thickness 3 3 3 3 3 3 3.5 4 4.5 5 5 5 5.5 5.5 6 6.3 7
Seal face thickness 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 3.5 4 4 4.5 4.5 5 5 5.5

Note:

1. Minimum length shall not be less than 100mm. The maximum diameter of pull-fit straight pipes is DN600;

2. Dimensions of pipe fittings are shown in Appendix Tables 4.6 to 4.8;

3. The minimum outer diameter of the end flanged face shall conform to HG/T 2437, see Appendix Table 4.20 for details.

ONLINE MESSAGE

*Note: Please make sure to fill in the information accurately and maintain smooth communication. We will contact you as soon as possible