+
  • 钢衬氟塑对夹式放净环.jpg

Steel-Lined Fluoroplastic Wafer Type Drain Ring

Steel-lined fluoroplastic wafer type drain ring is an industrial fitting specially used for pipeline systems with highly corrosive media. It is widely applied in chemical, pharmaceutical, power plant and other scenarios with extremely high corrosion resistance requirements.It is usually installed at instrument connections, discharge outlets or low points of pipelines to drain residual media, remove accumulated liquid or conduct sampling inspection, so as to ensure system cleanliness and operation safety.

Keywords:

Valve pipeline

Product details

Steel-lined fluoroplastic wafer type drain ring is an industrial fitting specially used for pipeline systems with highly corrosive media. It is widely applied in chemical, pharmaceutical, power plant and other scenarios with extremely high corrosion resistance requirements.It is usually installed at instrument connections, discharge outlets or low points of pipelines to drain residual media, remove accumulated liquid or conduct sampling inspection, so as to ensure system cleanliness and operation safety.

Adopting wafer structure design, the drain ring is made of carbon steel or stainless steel. A complete anti-corrosion layer is formed inside through fluoroplastic lining processes such as PTFE, PE and PO, which completely isolates the metal shell from corrosive media.

Steel-lined Fluoroplastic Wafer Type Drain Ring Dimensions (Unit: mm)

Nominal size (DN×dn) D L(PE/PO) H(PE/PO) L(PTFE) H(PTFE)
PN10 PN16 Class150(PN20)
40×25 90 80 80 100 100 125
50×25 105 100 80 115 100 130
65×25 125 120 80 125 100 140
80×25 140 130 80 140 100 145
100×25 160 170 80 150 100 155
100×32 160 170 90 150 110 155
125×25 190 190 80 160 100 170
125×32 190 190 90 160 110 170
125×40 190 190 100 160 120 170
150×25 215 215 80 180 100 180
150×32 215 215 90 180 110 180
150×40 215 215 100 180 120 180
200×25 270 275 80 200 100 210
200×32 270 275 90 200 110 210
200×40 270 275 100 200 120 210
250×25 325 335 80 230 100 240
250×32 325 335 90 230 110 240
250×40 325 335 100 230 120 240
300×25 375 380 405 80 300 100 300
300×32 375 380 405 90 300 110 300
300×40 375 380 405 100 300 120 300

Note

1. The dimensions of drip ring of DN400 and above can be customized according to process and customer requirements;

2. It is recommended to use drip ring in form 1; drip ring in form 2 is a thick-wall pipe with high cost, which will be adopted under the premise that form 1 is unable to be produced.

ONLINE MESSAGE

*Note: Please make sure to fill in the information accurately and maintain smooth communication. We will contact you as soon as possible