PRODUCTS
Fax: 0575-87215311
Web: www.cntongqiu.cn
Tel: 0575-87381708
0575-87386708
Technical R&D Department Tel: 0575-80706629
Email: cntongqiu@cntongqiu.com
Address: No. 2 Hongyan Road, Feida Industrial Park, Paitou Town, Zhuji City, Zhejiang Province
Steel-Lined Electronic Grade PTFE Composite Pipe
Steel-lined PTFE isostatic flanged pipes are manufactured by molding PTFE tubes through isostatic pressing process. Sintered PTFE tubes are tightly inserted into steel pipes. After stress relief treatment, flanging of sealing surfaces is carried out.
Steel-Lined PTFE Conductive Composite Pipe
Steel-lined PTFE conductive composite pipe is a composite pipe which is made by pulling the modified PTFE conductive finished pipe into the inner wall of steel parts and flanging after the stress is released; the fitting is a composite pipe made by filling the modified PTFE powder into the inner wall of the steel parts and sintering after it is pressurized and shaped by a hydraulic press.
Steel-lined PTFE (polytetrafluoroethylene) isostatically pressed flanged composite pipe
The steel-lined PTFE pipe with isostatic pressing and flanging is manufactured by employing an isostatic pressing process to produce the PTFE liner. A tight‑lining technique is then used to draw the sintered PTFE liner into the steel tube; following stress relief, the sealing surface is subsequently flanged.
Steel-Lined PTFE Isostatic Pressing Composite Pipe
Steel PTFE Isostatic Press Composite Pipe It is manufactured by filling PTFE powder into the inner wall of steel pipe, shaping under high water pressure in an isostatic pressing autoclave, and then sintering to form a composite pipe.
Steel-Lined PTFE Molded Composite Pipe
Steel lining PTFE molded composite pipe is a kind of composite pipe, which is made by filling PTFE powder into the inner wall of steel parts, pressing and shaping it by hydraulic press before sintering.
Steel-Lined PTFE Push-Pull Composite Pipe
Steel-lined PTFE push-pull composite pipe is made by pulling the finished PTFE pipe into the inner wall of the steel part, and then flanging after the stress is released. This process is only suitable for the production of straight pipes, and the fittings are made in accordance with the molding process.