Steel-Lined F40 Vessel


There are two processes for rotational molding and spraying coating for Steel-lined F40 Vessel;

Steel-Lined PTFE Isostatic Pressing Vessel


Isostatic PTFE-lined Steel Vessel is to fill PTFE powder in the inner wall of the steel body, put it in the isostatic pressure kettle, set it by high water pressure, press the filler with hydraulic press, and then sinter it to the composite pipe.

Steel-Lined PTFE Wound Lining Vessel


Steel-lined PTFE wound lining vessels adopt PTFE films or strips, which are spirally wound onto the inner wall of steel components by special winding machines. After hot pressing and shaping, a seamless anti-corrosion lining layer is formed. Metal mesh is often embedded to enhance structural strength, pressure resistance and vibration resistance.

Steel-Lined PTFE Lapped Lining Vessel


Steel-lined PTFE lapped lining vessels are products manufactured by lining sodium-treated prefabricated PTFE sheets onto the inner wall of steel components. The PTFE sheets are cut, overlapped and hot-press welded on-site to form an integrated lining layer.

Steel-Lined PTFE Sheet Lined Vessel


Steel-lined PTFE plate-lined vessels are manufactured by bonding PTFE turned plates to the inner wall of the steel structure with high-temperature resistant adhesive. The plates are then integrally welded using PFA welding rods. (Suitable for special-shaped structures or partial external lining applications.)

< 1 > proceed page